The Dangers of DIY Electrical Work

The Dangers of DIY Electrical Work

Dangers of DIY Electrical Work

Messing around with electricity is dangerous. A single mistake could result in massive destruction of property or death. Despite the stun warnings issued by government as well security agencies. Several people overlook the precautionary measures and participate in the ’do it yourself’’ revolution acts.

With the emergence of DIY videos on YouTube, homeowners and budding tradesman become tempted to carry out the electrical work naively. It can be tempting to save a few dollars but you should always avoid DIY electrical work. It is risky, illegal and can have devastating consequences.

Below are several potential dangers of DIY Electrical work which were supplied by the team at Pro Electrician Melbourne, a leading electrical contractor based in Victoria.  Always hire licensed electrical contractors to become safe.

1. Electrocution

Did you know that a minimum electrical shock of 14 milliamps is fatal? High-voltage shocks can cause critical burns, massive internal injury, nerve damage, not forgetting the possibility of stopping your heartbeat, in which case the outcome is death. The chances of surviving an electrocution are minimal. It results from such mistakes as:

  • Coming into contact with live cables
  • Failure to break the current flow at the switch
  • Reverse polarity which arises from flipped hot and neutral wires at an outlet

2. Fire

Bad wiring, faulty installation or using wrong equipment is the main cause of fire. Always check the problems after electrical work. As a result, an electrical fire might erupt from overheated circuits leading to extensive damage to property.

It may take days, weeks, or even months before the system fails. You might celebrate for completing your DIY electrical wiring project accurately, but the truth is that you just postponed a tragedy.

3. Violation of Building Codes and Permits

It’s an indispensable requirement by law that you possess a building permit before undertaking any electrical work in your home. Also, To perform DIY Electrical Work every person must have licensed as like professional

In any case, a licensed electrician should request for the permit from house owners to ensure that any electrical work done meet the following:

  • The legislative requirement
  • The technical standards
  • And the safety codes

By law, any breach of these practices attracts a substantial penalty or imprisonment.

4. Wrong Electrical Products

If you’re a novice, the chances are that you’ll use incorrect products including wires, cables, outlets, or switches. Wires exist in different gauges (sizes)and each should be used in a specific situation.

You might mistakenly use a light bulb with a higher wattage than the socket. If you install the wrong electric tool, the risk of short-circuit in the fuse or overheating becomes significantly possible.

5. Replacement of fuses

One primary cause of fires in buildings result from blown fuses or tripped. But when it replaced with bigger breakers or fuses.

If there were a fault in the circuit wiring during installation, the fuses circuit breakers would ultimately blow leaving you frustrated when part of or the entire home goes into a blackout. To incur frequent repair and maintenance costs, don’t do it by yourself.

For this reason, to save money-time-frustrations always hire a professional electrician to install the complete system.

6. Faults in your electrical box

The electrical box functions to accommodate and protect wires, cables, and switches from external contact. Having that in mind, it’s unsafe to have any connection outside the box.

Similarly, you should avoid leaving them open or filled beyond capacity to prevent overheating or short-circuiting.

7. House Inspection Issues

You might decide to sell your house and settle elsewhere. Your home undergoes a professional inspection where the electrical system must pass before usage.

Any aspect of DIY Electrical Work or repair is not overlooked and in most cases don’t pass the check. Failure to meet the standards after an electrical inspection is treacherous, and can lead to hefty fines.

Moreover, you will be compelled to hire a professional electrician to tear out and replace everything. That might cost you much more and even scare away potential buyers.

8. GFI Implementation

Ground Fault Interrupter is a component that protects us from getting shocked by faulty electrical devices we use in our homes.

They are specialized outlets installed in an area subject to moisture, preventing users from receiving electric shocks in the event of errant current. It’s really true that many DIY electricians are familiar with the concept but neglected

Final Thoughts

Evidently, there is profusion of risks that calls for people to take precautions before undertaking any DIY electrical work.

We can’t overlook the fact that professional electricians undergo thorough training to acquire relevant skills required in this industry.

To avoid dangerous and costly mistakes hire professional. It makes no sense to compromise the safety of your family at the expense of saving a few dollars. Don’t die trying to be an electrician, just call a professional.

Check More: